Post by Don Barone on Jun 11, 2020 12:10:11 GMT -5
And so it was that my analysis of the causeways at The Bent Pyramid were not going well and so I decided to return to The Great Pyramid and it's passageways. Now I had been thinking for goodness sakes The Ancient Builders had not used inches or meters but had used CUBITS ! So all this garbage of it being 720.7 inches was so much garbage . The builders could not have measured to 720.7 / 20.62 = 34.9515 cubits. Logic dictates that they would have chosen 35 cubits. Likewise in the slope angle that are assigned to the various pyramids . For The Great Pyramid it is 26.1° . Now think about this for a minute, how could the builders have created this angle ? Tan of this angle is 0.489895 or 2.041253 . So why would any sane person or builder choose this ? I contend that that is not at all what was designed and so I now present what I have called The "Kiss" Design of The Passageways of The Great Pyramid .
Well at least this is how I would have presented it to Khufu .
I will be elaborating on the angle chosen in a seperate thread.
The Blueprint of The Great Pyramid
Always look for the picture within the picture. At least so sayeth The Lion King